Thermonamic Electronics(Jiangxi) Corp., Ltd.
Main products:Thermoelectric Modules
Contact Us
  • Contact Person : Ms. Fang Yichen
  • Company Name : Thermonamic Electronics(Jiangxi) Corp., Ltd.
  • Tel : 86-0791-88198288
  • Fax : 86-0791-88198308
  • Address : Jiangxi,Nanchang,No.1129, Gaoxin Road, Torch Hi-Tech Zone, Nanchang, Jiangxi
  • Country/Region : China

Thermoelectric Generator System for Wood and Bio-fuel Stove

Thermoelectric Generator System for Wood and Bio-fuel Stove
Product Detailed
Designed for a biomass stove to power its blower,increase its burning efficiency and bring smoke free burning for the stove.

The generator consists of a thermoelectric module, a heat sink for the module cooling, a blower to provide the fresh air for the stove burning and heat sink cooling, and a rechargeable battery. The battery is used for starting burning when the stove is not heated up. The generator will take over the battery to power the blower and charge the battery after around 10 minutes cooking, when the combustion chamber is heated up.The generator provides a self-powered system for the stove without relying to outside electricity grid. It is suitable for biomass or wood stove. The biomass or wood burning in the combustion chamber heats up the wall of its combustion chamber. The heat can be converted into electricity by thermoelectric modules.The thermoelectric generator is light in weight, small in size, easy to fix, and reliable, and has a high power generationefficiency. It is especially designed to convert a small portion of heat conducted from side wall and bottom of the stove toelectricity which is enough for powering the blower and charging its battery, and its excess power can be used for powering small communication equipment like mobile phones and LED lamp during home cooking.

Instructions in useFix the thermoelectric generator on the edge of the bottom of the combustion chamber by screws. Connect the blower with to the inlet in bottom of stove, then connect the output of the generator to the blower and battery .


(1) Starting, please connect the battery to the blower to provide air for combustion, the generator will take over to power the blower and charge the battery.(2) After 15 minutes cooking, you use excess power from the generator to power small electronics product like mobile phone.

Packing ListThermoelectric Generator System one set

System DemoFix the thermoelectric generation system to the stove, and connect the rechargeable battery to the blower, then put the biomass bricks into the combustion chamber and burn it. After the 10 minutes, the output from the generator is enough to power the blower and charge the battery back.

Thermoelectric Generator System for Wood and Bio-fuel Stove

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.