30 Watts Portable Thermoelectric Power Generator

This is a portable thermoelectric power generator for Gas Stove or Wood Stove Heater or any other heat sources.

30 Watts Portable Thermoelectric Power Generator

 

 

The generator can be placed on the surface of heat source (oven, gas stove, wood stove, etc.) to generate the electricity for charging the battery, and power electronics with its 12 VDC and 4.5 VDC outputs. The generator comes with a self-powered fan to dissipate the heat. When the hot plate of the generator is heated to 380 °C, the output power will go over 24.5 watts. The Generator start work at is good for running on 330 °C to 450 °C heat source surface. It is not only a power generator, but also help circulates the heat with its attached fan.

The unit is, light in weight, small in size, easy to carry, especially suitable for field or emergency circumstances, as all kinds of small communications and emergency lighting power supply.

 

Instructions in use

Put the generator on the heat source surface. About 30 seconds later, the cooling fan of the generator starts running. Wait for 5 minutes till the cooling fan running at full speed. Then you can add the load on the generator.

 

Notes

(1) The casing will become a bit hot after a while. Do not touch the generator casing.

(2) 30 seconds after the generator is placed on the heat source surface, please check if the fans start to rotate. If you do not      see the fan starts to blow the air. Please take out the generator to check. To remove, please use the hanger on the top of the generator.

(3) Generator can operates at  temperature up to 450 °C heat source surface.

 

Packing List

(1) 30W generator                 one set

(2) Cigarette lighter (with USB port) one set

(3) Battery Charging clip           one pair

30 Watts Portable Thermoelectric Power Generator